Two decades in dosing & metering
Precisionin everydose.
Electromagnetic and motor-driven metering pumps, turnkey chemical dosing systems and agitators. Engineered, manufactured and flow-tested in Chennai for plants across India.
01Product range
Five product lines.
One standard of accuracy.
Every pump we make is built around a single promise: the right chemical, in the right amount, every stroke.
FE-A series
10 models across 100 and 180 SPM. Up to 20 LPH and 12 kg/cm².
View series
FE-AA Auto Dose
Set-once, steady dosing. 10 models, up to 20 LPH and 12 kg/cm².
View series
FE-CD series
Three compact models. Up to 10 LPH and 12 kg/cm².
View series
FE-M series
Heavy-duty motor-driven pumps, up to 1000 LPH.
View series
Dosing systems & agitators
Ready-to-connect skids, agitators, spares and service.
View systems02Why Focus Engineerrs
Engineered for accuracy.
Backed for the long run.
Plant builders and operators choose us for pumps that dose what the data sheet says, and for support that does not end at delivery.
Two decades, one speciality
Since our start we have worked in a single field: the controlled feeding of chemicals. That focus shows in every pump.
Made in our own workshop
Drive units, liquid ends and assemblies are built in-house in Chennai, so quality is controlled from component to finished pump.
Every unit flow-tested
Each pump is tested against its rated flow and pressure before dispatch, not sampled in batches.
Published technical data
Every model has a data sheet with ratings, materials of construction and installation drawings. No guesswork at the design stage.
Material choice for your chemical
PP, PVC, PTFE and SS-316 pump heads, with valves, balls and seals selected to suit acids, alkalis, oxidisers and solvents.
Support after installation
Commissioning guidance, genuine spares and servicing from the people who built the pump.
03Product gallery
Our pumps,
as they leave the workshop.
Real photographs of Focus pumps, built and flow-tested in Chennai. Select a pump to see its series, or open the full gallery for systems, agitators and our workshop.
04Industries we serve
Where our pumps
do the work.
From municipal water to boiler houses and process lines, Focus pumps feed the chemicals that keep plants running.
Water treatment & RO plantsAntiscalant · hypochlorite · SMBS
Effluent & sewage treatmentPolyelectrolyte · alum · lime
Boiler feed waterOxygen scavenger · phosphate · amines
Cooling towersInhibitor · biocide · dispersant
Swimming poolsHypochlorite · acid · flocculant
Process industriesAdditives · CIP · dyes
Power & utilitiesBoiler & cooling-water chemicalsManaging Director
K. Saravanan
05Leadership
“For two decades our work has been measured in millilitres. Getting that small number right, every time, is what earns a plant’s trust.”Read the Managing Director’s message
06Engineering & quality
Built in-house.
Tested before it leaves.
- 01
Understand the duty
Chemical, flow, pressure and site conditions, before we quote.
- 02
Manufacture in-house
Our own tools and infrastructure, with checks at every stage.
- 03
Calibrate every unit
Each pump is flow-tested against defined parameters.
- 04
Commission & support
Installation guidance, spares and after-sales service.
07Compare series
Choose by duty.
A quick comparison of our pump series. Every model has a full data sheet.
| Series | Drive | Flow range | Max. pressure | SPM | Pump heads | Power | Best for |
|---|---|---|---|---|---|---|---|
| FE-A | Solenoid (electromagnetic) | 1.0 – 20.0 LPH | 12.0 kg/cm² | 100 / 180 | PP, PVC, PTFE, SS-316 | 220 V, 1 ph, 50 W | Low-flow dosing on water, RO and process lines |
| FE-AA Auto Dose | Solenoid (electromagnetic) | 1.0 – 20.0 LPH | 12.0 kg/cm² | 100 / 180 | PP, PVC, PTFE, SS-316 | 220 V, 1 ph, 50 W | Set-once, steady dosing with low power use |
| FE-CD | Electronic diaphragm, compact | Up to 10.0 LPH | 12.0 kg/cm² | 100 | PP | 220 V, 1 ph, ~40 W | Compact installations, pools, small RO skids |
| FE-M | Motor + worm gear | 17 – 1000 LPH | 10.0 kg/cm² | 99 – 150 | PP, SS, Teflon | 415 V, 3 ph | High-capacity, continuous duty |
08Technical data sheets
A data sheet for
every pump.
Download the full specification for each model, with ratings, materials of construction and installation drawings.
FE-A-104
- Max. flow
- 6.0 LPH
- Max. pressure
- 4.0 kg/cm²
FE-AA-126
- Max. flow
- 15.0 / 10.0 LPH
- Max. pressure
- 4.0 / 5.0 kg/cm²
FE-CD-1
- Max. flow
- 10.0 LPH
- Max. pressure
- 5.0 kg/cm²
FE-M-58C
- Max. flow
- 500 LPH
- Max. pressure
- 5.0 kg/cm²
09FAQ
Common questions.
What is the difference between electromagnetic and motor-driven pumps?
Electromagnetic (solenoid) pumps such as FE-A, FE-AA Auto Dose and FE-CD have no motor or gearbox. They use little power and are ideal for low flows up to about 20 LPH. Motor-driven pumps such as FE-M use a motor and worm gear for high-capacity, continuous duty, up to 500 LPH on the FE-M-58C.
How is the dosing rate adjusted?
On FE-A and FE-AA pumps, output is set by both stroke length and stroke speed, giving a 10:1 turn-down ratio. Stroke length should only be adjusted while the pump is running. FE-M pumps use a manual stroke length adjuster.
Which pump-head material should I choose?
PP and PVC suit most water-treatment chemicals such as hypochlorite and antiscalants. PTFE is used for aggressive acids and solvents, and SS-316 for chemicals that need a metallic head. Tell us the chemical and concentration and we will recommend the material.
Can the pump lift chemical from a tank below it?
Yes. Our electromagnetic pumps are designed for negative suction with up to 1.5 m lift when installed with the recommended foot valve. For viscous or gassing chemicals, a flooded (positive) suction layout is preferred.
Not sure which model fits?
